The best place to display a taxidermy mount at home is a dry, climate-controlled room away from direct sunlight, heat sources, and busy walkways. Choose a wall or stable base that supports its weight, leaves room around its widest points, and lets you see its face from where you usually sit or stand.
Which room is best for a taxidermy mount?
A living room, den, home office, or dedicated display room usually works well if you keep the temperature and humidity reasonably steady. Start by considering an interior wall, where you may find it easier to avoid sunlight and temperature changes than on an exterior wall.
Judge the space by its conditions, not its name. You can use a finished basement with reliable moisture control, but avoid an unfinished basement with damp walls. Choose an insulated room you regularly use rather than an attic, garage, or enclosed porch.
Choose a location where you can inspect the mount without moving heavy furniture. You should be able to see the ears, eyes, seams, and base clearly enough to notice dust, insect debris, or changes in condition.
For a large shoulder mount, measure how far the entire mount extends from the wall, not just the plaque. Antlers, horns, and a turned head can extend into a doorway or walkway even when the mounting point seems safely out of the way.
What conditions can damage a taxidermy mount?
Avoid direct sunlight, even if it reaches the mount for only part of the day. Light damage accumulates, and you can't reverse fading simply by moving the specimen later. You can find collection-care guidance on light exposure, environmental conditions, and other preservation risks from the National Park Service.
Keep mounts away from fireplaces, radiators, heating vents, and air-conditioning outlets. Concentrated heat and repeated changes in humidity can stress skin, adhesives, and repaired areas. Damp conditions can encourage mold and damage organic materials.
As a practical starting point, aim for stable relative humidity around 40 to 55 percent rather than trying to maintain an exact reading. Different materials and existing damage may call for different conditions, so ask a conservator about fragile, historic, or unusually valuable specimens. Use an inexpensive digital hygrometer to check for persistent dampness or large humidity fluctuations.
- Keep the mount out of direct sunlight from windows and skylights.
- Avoid bathrooms, cooking areas, and spots exposed to steam or grease.
- Leave space between the specimen and lamps that give off noticeable heat.
- Keep delicate feathers, fur, fins, and ears away from strong airflow.
For extra lighting, use a low-heat LED fixture far enough away to light the mount without warming it. Turn display lights off when you don't need them.
How high should you hang a shoulder mount?
Choose the height based on the animal's face and your viewing position, not the top of its antlers. If you mainly view the mount from a sofa, you'll generally want it lower than if you view it while standing. Large antlers may require you to hang it higher, but placing the face close to the ceiling makes details harder to see.
Before drilling, mark the mount's width and height on the wall with painter's tape, and measure how far it will extend into the room. Check the proposed position from the doorway and your usual chair. Make sure you can fully open doors, cabinet doors, and nearby window coverings.
Leave clearance around every tip. Allow enough room around antlers, horns, wings, and ears to prevent them from scraping the ceiling or touching furniture during everyday use. Don't place sharp projections above a seat where someone could stand up into them.
How do you securely attach a taxidermy mount to a wall?
Ask your taxidermist for the finished weight, hanger type, and recommended attachment method. You may not be able to tell from the visible plaque how the mount supports its weight. Don't improvise a hanger, which can fail even if the wall fastener holds.
For a heavy shoulder mount, secure the mounting hardware to a stud or suitable blocking whenever possible. Use fasteners suited to masonry or any other wall material. Don't assume a picture hook or drywall anchor will work just because its listed weight capacity exceeds the mount's weight. How far the mount extends from the wall affects the load on the connection.
If you're unsure about the wall construction or hardware, ask a qualified installer to choose the fasteners and attachment method. Ask another adult to help you lift a bulky mount, and support it at its structural base. Never lift it by the ears, antlers, horns, wings, or tail unless your taxidermist specifically approves that method.
Where should you place tabletop and life-size mounts?
Place small mammals, birds, and fish displays on furniture that won't rock, flex, or tip easily. Support the entire base and keep it away from the edge. You can reduce dust and accidental contact with a properly fitted display case, but keep the case out of sunlight and check inside for moisture or insect activity.
For pedestal and life-size mounts, choose a level spot outside normal walking routes. Leave enough room to vacuum around the base without striking feet, tails, or habitat materials. Before installation, check that your floor can support an unusually heavy specimen and base.
Keep mounts out of reach of children and pets. Take extra care with older specimens whose treatment history you don't know, since taxidermists historically used some hazardous preservatives. Consult a conservator before cleaning one or displaying it where people may touch it frequently.
Can you display taxidermy above a fireplace?
A working fireplace is generally a poor choice because heat, soot, and smoke can damage your mount. Don't assume a mantel will shield it. Choose another wall rather than relying on extra height to prevent exposure.
You may be able to display a mount above an unused decorative fireplace if the wall stays dry, the mount receives no direct sunlight, and you can attach it securely. Check the chimney area for leaks or staining before installation.
Wherever you place your mount, inspect it regularly for shed hair, loose feathers, insect casings, powdery debris, or new damage. Contact your taxidermist or a qualified conservator if you find these signs. Don't spray household insecticide or cleaning products onto the specimen.