You usually need two measurements for a fish replica: total length and girth. Send clear photographs and the species name, too. Your taxidermist may also request fork length or another measurement to match an available replica blank, so ask for the shop’s measuring instructions before your trip if possible.
How to measure a fish’s length
Measure total length in a straight line from the front of the closed mouth to the farthest tip of the tail. Use a measuring board or a flat ruler beside the fish rather than running a flexible tape over its body, which can make the measurement longer than it should be.
Tail position matters because spreading or compressing the tail changes the reading. Many measuring methods call for gently bringing the tail lobes together, but your taxidermist may need a different tail position for a particular blank. Record how you positioned the tail so your taxidermist knows how to interpret the measurement.
- Place the fish straight on a wet, smooth measuring surface.
- Align the front of the closed mouth with the zero mark.
- Position the tail according to your taxidermist’s instructions.
- Read the length directly from above, without bending the fish or following its curve.
- Photograph the fish alongside the ruler or measuring board, keeping both ends of the fish and the measurement marks visible.
To measure fork length, measure from the front of the mouth to the deepest point of the tail’s fork. For standard length, stop at the base of the tail fin, not its tip. You can’t substitute either measurement for total length, so label whichever one you take.
Record inches or centimeters and include only the fraction or decimal you can actually read. A clear measurement to the nearest quarter inch is more useful than a measurement reported to the hundredth of an inch without a ruler precise enough to support it.
How to measure a fish’s girth
Girth is the circumference around the fish’s body, usually at its fullest point. This measurement helps your taxidermist distinguish a slender fish from a deep-bodied or heavy-bodied fish of the same length.
Use a soft, nonstretch measuring tape. Wrap it around the body perpendicular to its length, generally just ahead of the dorsal fin or wherever the body is fullest. The correct location varies by species, so record where you measured and follow any instructions your taxidermist provides.
Keep the tape snug without squeezing. Don’t include raised fins in the circumference or pull hard enough to compress the belly. If you use nonstretch string instead, mark where the ends overlap and measure that section against a ruler afterward.
Support the fish horizontally while you take the reading. If you plan to release a live fish, have your tools ready and prioritize a quick, careful release over extra measurements. NOAA Fisheries recommends minimizing handling and time out of the water during catch-and-release fishing.
Which photos does your taxidermist need?
Your measurements establish size, but your photographs guide the paintwork and help your taxidermist assess body shape. A replica blank is a manufactured fish form. Your photos help the artist reproduce the individual markings and colors that make your fish recognizable.
Send these reference photos:
- A full side view with the fish straight and the camera square to its body.
- A photograph of the opposite side if its markings differ.
- A close-up of the head, including the eye, cheek, jaw, and gill cover.
- Clear views of the fins, tail, spots, bars, and unusual markings.
- A measurement photograph with the ruler or tape readable.
Prioritize the side you want displayed on the finished mount. Keep your hands and equipment from covering distinctive markings whenever you can do so while still supporting the fish properly.
Send unfiltered originals rather than screenshots or heavily edited images. Filters, strong color adjustments, glare, and deep shadows can give the painter an inaccurate impression of the fish’s colors. If the fish’s appearance changed before you photographed it, tell your taxidermist which image best represents how it looked when you caught it.
Can you order a fish replica without measurements?
You can often order a replica with incomplete information, but you’ll have less certainty about the match. If you have an accurate length but no girth, your taxidermist can compare your photographs with available blanks and recommend a suitable body shape.
A known weight can help, but weight doesn’t replace girth. Fish of the same length and weight can carry their mass differently, and a length-weight calculation won’t establish your fish’s exact dimensions.
If you have only photographs, send the original files and explain what you know about the fish’s size. A ruler in the same plane as the fish offers a better reference than a hand or an object held closer to the camera. Perspective can make a fish appear substantially larger or smaller.
Separate verified measurements from estimates. If you label a remembered length as approximate, your taxidermist can explain the likely compromises rather than choose a blank based on a measurement that appears more precise than it is.
What should you confirm before ordering a fish replica?
Send the species, labeled measurements, original photos, and your preferred display side together. Include the recorded weight if you have it, but say whether you weighed the fish on a scale or estimated its weight.
Ask which available blank best matches both length and girth. Replica suppliers offer specific sizes and body shapes, so your taxidermist may need to choose the closest fit or modify a form. Matching length alone doesn’t guarantee the same belly profile, head proportions, or overall fullness.
Confirm the proposed dimensions, pose, mouth position, and any modifications before you approve the work. Ask whether the quoted length describes the blank’s straight-line measurement or the finished mount’s overall span, since a curved pose changes how much wall space the mount occupies.
Request a written description of the agreed size and any differences from your fish that you’ve accepted. You’ll have a clear record of what you’re ordering, and your taxidermist can explain what to expect before starting construction and painting.
Sources
- Welcome to NOAA · NOAA Fisheries (fisheries.noaa.gov)